Source: https://tendernation.io/opportunities/01a13c81-f005-712d-888b-f2e35d916006/fall-protection-inspections-equipment-servicing-maintenance-and-training closed GB open procedure Suitable for SMEs # Fall Protection Inspections, Equipment Servicing, Maintenance and Training [University of Southampton](https://tendernation.io/buyers/university-of-southampton) Estimated value £250,000 to £300,000 Published 1 Apr 2021 Deadline Closed 28 Apr 2021 ## Who can bid - Buyer says suitable for SMEs The buyer ticked “suitable for SMEs” on the notice. Anyone can still bid. - Open procedure Anyone can submit a full tender; there is no shortlisting stage. [More contracts for small businesses and VCSEs](https://tendernation.io/opportunities/for-small-businesses) ## About this tender The University is seeking suitably experienced tenderers to fulfil the requirement for inspection and maintenance of the University's fall protection systems carried out at the University of Southampton's campuses, Halls of Residence and any other site where the University has responsibility for maintenance of the The University is seeking suitably experienced and qualified tenderers to fulfil it's requirements for inspections, equipment servicing, maintenance and training. The University's fall protection systems are located at the University of Southampton's campuses, Halls of Residence and other nearby satellite sites where Estates and Facilities are responsible for the maintenance of buildings. The successful tenderer must be able to demonstrate their competency in delivering the services as outlined within the service specification (File 4) and be suitably certified and affiliated to a recognised industry representative group(s). ### Inspection Services A recommendation with regards to the frequency of inspections will be required for all equipment and buildings as listed in section 3.1 of the specification. This should take into account legislation, equipment type, frequency of use as well as environmental conditions and should include a statement that periodic inspections should be carried out a least every 12 months. Interim inspections might be needed between detailed inspections where the risk assessment has identified a hazard that could cause significant deterioration in the equipment, for example paint, chemicals or acidic or alkaline environments. ### Installation works The successful tenderer will be required, upon request, to carry out installation works to buildings and roof's, upon completion of the surveying and inspection phase. Proposed installations must be communicated to the University via the appointed contract administrator and agreement must be made between the two parties before any works are to commence and a purchase order is raised. All installation works carried out must adhere to relevant regulatory and legislative requirements as detailed in section 5.2 of the specification. ### Maintenance The successful tenderer will be required to maintain workplace equipment, devices and systems as per the applicable regulatory and legislative requirements set out in section 5.2 of the specicification. Any items that are past their usable lifecycle should be reported to the relevant University representative and/or contract administrator. Agreement must be made between the two parties before any replacement items are purchased and charged to the University. ### Training The successful tenderer will be able to deliver fall protection system and personal protection equipment training for new recruits and refresher training for existing staff. This should be in line with University training policies which require training updates on a 2-yearly basis. Any course provided must cover the following ... Additional information: E-Tendering Portal: The University is utilising an electronic tendering tool, In-Tend ([in-tendhost.co.uk](https://in-tendhost.co.uk/) universityofsouthampton) to manage this procurement and to communicate with potential suppliers and/or tenderers (as appropriate). All documentation in relation to this tender can be downloaded from In-Tend. Potential suppliers/tenderers are advised that there will be no hard copy documents issued and all communications with the University, including the submission of Selection Stage and/or Invitation to Tender responses will be conducted via In-Tend. Regular monitoring of the portal is the responsibility of the potential supplier/tenderer. If you are not already registered as a supplier with the University of Southampton, you will need to register in In-Tend in order to access the procurement documentation. Once you have logged in as a supplier: click on 'Tenders'; locate the relevant project; and click 'View Details'. Once you are in the project screen, you will be able to register your organisation against the project and access all documentation by clicking 'Express Interest'. Potential suppliers/tenderers are advised that formal expressions of interest in the project must be by way of completion and return of the relevant documents via In-Tend. Further instructions for the submission of responses are below: To submit your return: - Log in - Click 'Tenders' - Locate the relevant project - View details - Click on the tab relating to the relevant project stage (e.g. 'Invitation to Tender') - Click on the 'Attach Documents' button and upload your return. - Check ALL your response documents are uploaded and displayed in the 'My Tender Return' panel. The system will only permit your organisation to make one return. - Click the red 'Submit Return' button. Please note, to preserve the integrity of the procurement, all communications with the University must be made via the correspondence function within In-Tend. Publication of Award Details: In accordance with Regulation 50, paragraph (2) of the Public Contracts Regulations 2015, the University intends to publish the value of any resulting contract at the award stage, and reserves the right to do so. By submitting a response, potential suppliers/tenderers are consenting to publication of this information unless otherwise agreed in advance with the University. Costs and Expenses: Potential suppliers/tenderers are solely responsible for their costs and expenses incurred in connection with the preparation and submission of responses and participation in this and all future stages of this procurement. Under no circumstances will the University be liable for any costs or expenses borne by potential suppliers/tenderers or any of their supply chain, partners or advisers in this procurement process. The University is not liable for any costs in the event of the cancellation of this procurement process. Is a Recurrent Procurement Type? : Yes Read full description ## CPV classification Technical building-inspection services Source Contracts Finder (UK) [View official notice](https://www.contractsfinder.service.gov.uk/notice/e28be128-c71e-418f-8467-1b53f5532564) Never miss a tender like this again Get AI summaries, deadline alerts and a bid pipeline for tenders matched to your business. Free to start. [Track tenders free](https://tendernation.io/register) [Buyer profile University of Southampton: past awards and live tenders](https://tendernation.io/buyers/university-of-southampton) [Sector More Architecture, engineering & surveying tenders](https://tendernation.io/sectors/architecture-engineering-surveying) ## More tenders like this [Construction project management services – Dietrich-Bonhoeffer-Gymnasium-Oberasbach – Neubau Mehrfachsporthalle · Landkreis Fürth · 28 days left · 16 Nov 2026](https://tendernation.io/opportunities/01a156a9-ce57-722f-92f9-e818a29a32bc/germany-construction-project-management-services-dietrich-bonhoeffer-gymnasi) [Architectural, construction, engineering and inspection services – Matthias-Claudius-Schule Tragwerk und Bauphysik · Stadt Kaarst - Der Bürgermeister · 36 days left · 24 Nov 2026](https://tendernation.io/opportunities/01a156a9-cc1c-708b-90a7-a22d2885c295/germany-architectural-construction-engineering-and-inspection-services-mat) [Engineering studies – réalisation D'UN schéma directeur intercommunal d'assainissement · Charlieu-Belmont Communauté · 49 days left · 7 Dec 2026](https://tendernation.io/opportunities/01a156a9-9427-728b-9f2e-57d5081fa516/france-engineering-studies-realisation-dun-schema-directeur-intercommunal-d) [Engineering services – Mission de Maîtrise d'oeuvre complète pour la construction de 111 logements VAULX-EN-VELIN (69120) - ZAC MAS DU TAUREAU Îlots J1/J2 · Alliade Habitat · 28 days left · 16 Nov 2026](https://tendernation.io/opportunities/01a156a9-932d-7197-8cc1-ad619ede83e0/france-engineering-services-mission-de-maitrise-doeuvre-complete-pour-la-co) [Architectural, construction, engineering and inspection services – Multi Operator Framework for Project Managers with Design/Technical Consultants for Educational Accommodation · Department of Education and Youth · 23 days left · 11 Nov 2026](https://tendernation.io/opportunities/01a156a9-cb77-70bf-a940-7366ca0959f7/ireland-architectural-construction-engineering-and-inspection-services-mul) [Engineering services – Sanierung der Festhalle Stöckwiese in Bietigheim, Freianlagenplanung · Gemeindeverwaltung Bietigheim · 28 days left · 16 Nov 2026](https://tendernation.io/opportunities/01a156a9-d828-701f-861f-726e9936bb48/germany-engineering-services-sanierung-der-festhalle-stockwiese-in-bietighei)