Source: https://tendernation.io/opportunities/01a13c0d-85a1-7258-8dff-bf01e000c287/supply-and-installation-of-a-reconfigurable-laser-micro-processing-workstation closed GB open procedure # Supply and Installation Of A Reconfigurable Laser Micro Processing Workstation [University of Birmingham](https://tendernation.io/buyers/university-of-birmingham) Estimated value Not stated Published 11 Dec 2017 Deadline Closed 19 Jan 2018 ## Who can bid - Open procedure Anyone can submit a full tender; there is no shortlisting stage. ## About this tender Supply and Installation Of A SmartFub Laser Micro Processing Workstation - ESIF Project The University of Birmingham invites tenders for supply of a reconfigurable laser micro processing workstation. The workstation will be used to facilitate/support the take-up of high impact laser micro processing technologies by the SMEs in West Midlands. In particular, it will be used to develop new applications with the technology provider and carry out feasibility studies and pilot projects to address the specific requirements of local SMEs. Therefore, it will be required as part of the project to build strong partnerships with the technology provider and define a joint co-funded R&D programme for the benefits of local businesses. ### General characteristics A workstation that can be reconfigured to realise a range of laser processing operations with high accuracy and repeatability, i.e. laser engraving/structuring, surface patterning and texturing, drilling and cutting, on complex/3D metal, ceramic and polymer substrates/parts. ### Specification - High stability class 1 workstation with granite table conforming to the requirements of latest machinery and laser health and safety standards (EN 13849-1, EN 60947-5-3:1999, EN 1088:1995+A2:2008, BS EN 13849, BS EN 1088, BS EN 60825: 2014) - High frequency NIR sub-pico laser (less than 500 fs) source with pulse energy of at least 40uJ and 10uJ @ 0.5 and 2 MHz, respectively, and pulse frequencies selectable in the range from 1 to 2000 kHz. - High dynamics scan head for micro patterning/structuring. In particular the scan head should meet the following requirements: the maximum scanning speed should not be less than 5m/s with a 100mm focusing lens; the tracking error of the scan head should not be bigger than 120us while the thermal drift should not be bigger than 30 urad; the frequency of the communication protocol should be sufficiently high to allow scribing of short lines at high speeds (i.e. delay settings with a precision of ?1us which corresponds to 2um at 2m/s). - Modular and dust protected beam line with sufficient flexibility/reconfigurability to integrate additional optics, e.g. focal ?-shaper (500mm required after a beam expander) and/or diffractive optics (100mm before optional z-module). - Beam management functionalities (safety shutter, laser beam diameter expansion factor, polarization and power) monitored and easily controlled through the laser system software. - Environmental control (Air-conditioning) of the machine enclosure to avoid temperature variations more than ?2 degrees Celsius over period of 12 hours (without opening the machine door). - Exchangeable f-theta telecentric lenses and a workstation configuration that can accommodate lenses with focal distances of 80, 100 and 160 mm and a micro drilling/cutting head. - Multi-axis processing with two rotary stages, e.g. to realize different processing operations on axisymmetric and free-form... Additional information: All main correspondence should go via the University's In-Tend website. Your tender documents and information must be submitted via In-Tend by the date and time specified; [in-tendhost.co.uk](https://www.in-tendhost.co.uk/universityofbirmingham/aspx/Home). Is a Recurrent Procurement Type? : No Read full description ## CPV classification Machine tools operated by laser and machining centres Source Contracts Finder (UK) [View official notice](https://www.contractsfinder.service.gov.uk/notice/48391898-a367-4617-a5ea-74b40c50c362) Never miss a tender like this again Get AI summaries, deadline alerts and a bid pipeline for tenders matched to your business. Free to start. [Track tenders free](https://tendernation.io/register) [Buyer profile University of Birmingham: past awards and live tenders](https://tendernation.io/buyers/university-of-birmingham) [Sector More Industrial machinery tenders](https://tendernation.io/sectors/industrial-machinery) ## More tenders like this [Lifting and handling equipment – Moyens de manutention motorisés · Union des Groupements d'Achats Publics · 56 days left · 15 Dec 2026](https://tendernation.io/opportunities/01a156a9-88ab-73d8-bf7c-44ba9139abc3/france-lifting-and-handling-equipment-moyens-de-manutention-motorises) [Lathes – Strung universal cu diametrul de prelucrare între Ø 320 ÷ Ø 380 mm · S Uzina Mecanica Plopeni SA · 31 days left · 20 Nov 2026](https://tendernation.io/opportunities/01a156a9-89ea-7222-a30a-79ce9a09d1c7/romania-lathes-strung-universal-cu-diametrul-de-prelucrare-intre-o-320-o-3) [Water pumps – ΠΡΟΜΗΘΕΙΑ ΑΝΤΑΛΛΑΚΤΙΚΩΝ ΓΙΑ ΤΙΣ ΥΠΗΡΕΣΙΕΣ ΕΠΙΣΚΕΥΗΣ ΤΩΝ ΥΠΟΒΡΥΧΙΩΝ ΑΝΤΛΗΤΙΚΩΝ ΣΥΓΚΡΟΤΗΜΑΤΩΝ ΥΔΡΕΥΣΗΣ · ΔΗΜΟΤΙΚΗ ΕΠΙΧΕΙΡΗΣΗ ΥΔΡΕΥΣΗΣ-ΑΠΟΧΕΥΤΕΥΣΗΣ ΗΡΑΚΛΕΙΟΥ (Δ.Ε.Υ.Α.Η.) · 34 days left · 23 Nov 2026](https://tendernation.io/opportunities/01a156a9-74e7-7383-82e1-b4c6885044d2/greece-water-pumps-promhthia-antallaktikon-gia-tis-yphresies-episkefhs-ton-y) [Miscellaneous special-purpose machinery – „Wood Vision Lab“ - das Technikum: "Absauganlage" · Wood Vision Lab GmbH · 7 days left · 27 Oct 2026](https://tendernation.io/opportunities/01a156a9-7ec8-7322-8445-8dcef4fed830/austria-miscellaneous-special-purpose-machinery-wood-vision-lab-das-tech) [Centrifuges – Centrifug och styrskåp - Hudiksvalls kommun · Hudiksvalls kommun · 2 days left · 21 Oct 2026](https://tendernation.io/opportunities/01a156a9-8986-70b3-a08f-2e4ab5fe626c/sweden-centrifuges-centrifug-och-styrskap-hudiksvalls-kommun) [Machinery and apparatus for filtering or purifying water – Systém na přípravu ultračisté vody · Vysoká škola báňská - Technická univerzita Ostrava · 34 days left · 23 Nov 2026](https://tendernation.io/opportunities/01a156a9-8de7-7383-a6dd-5533ea57df0c/czechia-machinery-and-apparatus-for-filtering-or-purifying-water-system-na-p)